# hinv -vm Location: /hw/module/1/slot/n1/node MODULEID Board: barcode K0010960 part rev IP31 Board: barcode DLF573 part 030-1255-003 rev A IP31PIMM Board: barcode FXV748 part 030-1313-002 rev A 4P1G5_MPLN Board: barcode DNA039 part 013-1839-001 rev E Location: /hw/module/1/slot/io4/kona GE14-4 Board: barcode GGB287 part 030-1129-002 rev H Location: /hw/module/1/slot/io1/baseio BASEIO Board: barcode EDH395 part 030-0734-002 rev J MIO Board: barcode FZY355 part 030-0880-003 rev F 2 250 MHZ IP27 Processors CPU: MIPS R10000 Processor Chip Revision: 3.4 FPU: MIPS R10010 Floating Point Chip Revision: 3.4 CPU 0 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 CPU 1 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 Main memory size: 1024 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 4 Mbytes Memory at Module 1/Slot 81: 1024 MB (enabled) Bank 0 contains 128 MB (Standard) DIMMS (enabled) Bank 1 contains 128 MB (Standard) DIMMS (enabled) Bank 2 contains 128 MB (Standard) DIMMS (enabled) Bank 3 contains 128 MB (Standard) DIMMS (enabled) Bank 4 contains 128 MB (Standard) DIMMS (enabled) Bank 5 contains 128 MB (Standard) DIMMS (enabled) Bank 6 contains 128 MB (Standard) DIMMS (enabled) Bank 7 contains 128 MB (Standard) DIMMS (enabled) Integral SCSI controller 1: Version QL1040B (rev. 2), single ended Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) Tape drive: unit 5 on SCSI controller 0: unknown CDROM: unit 6 on SCSI controller 0 IOC3 serial port: tty1 IOC3 serial port: tty2 IOC3 serial port: tty3 IOC3 serial port: tty4 IOC3 parallel port: plp1 Graphics board: InfiniteReality2 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Iris Audio Processor: version RAD revision 7.0, number 1 Origin BASEIO board, module 1 slot 1: Revision 3 PCI Adapter ID (vendor 4265, device 3) pci slot 6 PCI Adapter ID (vendor 4265, device 3) pci slot 2 PCI Adapter ID (vendor 4215, device 4128) pci slot 0 PCI Adapter ID (vendor 4215, device 4128) pci slot 1 PCI Adapter ID (vendor 4265, device 5) pci slot 7 IOC3 external interrupts: 1 HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled) IP27prom in Module 1/Slot n1: Revision 6.111 IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.111 # gfxinfo -v Graphics board 0 is "KONAL" graphics. Managed (":0.0") 1280x1024 Display has 2 channels 4 GEs (of 4), occmask = 0x0f 4MB external BEF ram, 32bit path 1 RM7 board (of 1) 1/0/0/0 Texture Memory: 64MB/-/-/- Medium pixel depth 32K cmap brd: 80160a04 3020c06/-/-/- f9391002 ge: 0 14832057 24731057 14231057 rm0: 15032057 15431057 4631057 1/1/1/1 4d31057 2/2/2/2/2/2/2/2 4938057 4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4/4 dg: 05532057 5838057 1/1/1/1 5631057 1/1 GE: NIC #: 0000.0018.fc05 (family: 0b) Serial #: GGB287 Part #: 030-1129-002 KT: No NIC serial number available. RM0: NIC #: 0000.000e.5f88 (family: 0b) Serial #: EEA155 Part #: 030-1054-001 TM0: NIC #: 0000.000e.4193 (family: 0b) Serial #: EEA183 Part #: 030-1053-001 RM1: No NIC serial number available. TM1: No NIC serial number available. RM2: No NIC serial number available. TM2: No NIC serial number available. RM3: No NIC serial number available. TM3: No NIC serial number available. BP: No NIC serial number available. DG: NIC #: 0000.001f.7a34 (family: 0b) Serial #: GTP669 Part #: 030-1055-001 DGOPT:No NIC serial number available. Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False Channel 0: Origin = (0,0) Video Output: 1280 pixels, 1024 lines, 72.00Hz (1280x1024_72.vfo) Video Format Flags: (none) Sync Output(s): Composite sync on Green Composite TTL sync on Aux 0 Using Gamma Map 0 # hinv -vm Location: /hw/module/1/slot/n1/node MODULEID Board: barcode K0010960 part rev IP31 Board: barcode KRJ020 part 030-1523-001 rev C 4P1G5_MPLN Board: barcode DNA039 part 013-1839-001 rev E IP31PIMMR12KS Board: barcode KRJ427 part 030-1423-002 rev F Location: /hw/module/1/slot/io4/kona GE14-4 Board: barcode GGB287 part 030-1129-002 rev H Location: /hw/module/1/slot/io1/baseio BASEIO Board: barcode EDH395 part 030-0734-002 rev J MIO Board: barcode FZY355 part 030-0880-003 rev F 2 400 MHZ IP27 Processors CPU: MIPS R12000 Processor Chip Revision: 3.5 FPU: MIPS R12010 Floating Point Chip Revision: 3.5 CPU 0 at Module 1/Slot 1/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 1 at Module 1/Slot 1/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa Main memory size: 2048 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 8 Mbytes Memory at Module 1/Slot 81: 2048 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (enabled) Integral SCSI controller 1: Version QL1040B (rev. 2), single ended Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) Disk drive: unit 3 on SCSI controller 0 (unit 3) Tape drive: unit 5 on SCSI controller 0: unknown CDROM: unit 6 on SCSI controller 0 IOC3/IOC4 serial port: tty1 IOC3/IOC4 serial port: tty2 IOC3/IOC4 serial port: tty3 IOC3/IOC4 serial port: tty4 IOC3 parallel port: plp1 Graphics board: InfiniteReality2 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Iris Audio Processor: version RAD revision 7.0, number 1 Origin BASEIO board, module 1 slot 1: Revision 3 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7 IOC3/IOC4 external interrupts: 1 HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled) IP27prom in Module 1/Slot n1: Revision 6.94 IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.150 # irix-hinv Location: /hw/module/1/slot/n2/node IP31 Board: barcode KRT708 part 030-1523-001 rev C IP31PIMMR12KS Board: barcode KRT237 part 030-1423-002 rev G Location: /hw/module/1/slot/n1/node MODULEID Board: barcode K0010960 part rev IP31 Board: barcode KRJ020 part 030-1523-001 rev C 4P1G5_MPLN Board: barcode DNA039 part 013-1839-001 rev E IP31PIMMR12KS Board: barcode KRJ427 part 030-1423-002 rev F Location: /hw/module/1/slot/io4/kona GE14-4 Board: barcode GGB287 part 030-1129-002 rev H Location: /hw/module/1/slot/io1/baseio BASEIO Board: barcode EDH395 part 030-0734-002 rev J MIO Board: barcode FZY355 part 030-0880-003 rev F 4 400 MHZ IP27 Processors CPU: MIPS R12000 Processor Chip Revision: 3.5 FPU: MIPS R12010 Floating Point Chip Revision: 3.5 CPU 0 at Module 1/Slot 2/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 1 at Module 1/Slot 2/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 2 at Module 1/Slot 1/Slice A: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa CPU 3 at Module 1/Slot 1/Slice B: 400 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 3.5. Scache: Size 8 MB Speed 266 Mhz Tap 0xa Main memory size: 5120 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 8 Mbytes Memory at Module 1/Slot 82: 2560 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (enabled) Bank 4 contains 128 MB (Standard) DIMMS (enabled) Bank 5 contains 128 MB (Standard) DIMMS (enabled) Bank 6 contains 128 MB (Standard) DIMMS (enabled) Bank 7 contains 128 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 81: 2560 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (enabled) Bank 4 contains 128 MB (Standard) DIMMS (enabled) Bank 5 contains 128 MB (Standard) DIMMS (enabled) Bank 6 contains 128 MB (Standard) DIMMS (enabled) Bank 7 contains 128 MB (Standard) DIMMS (enabled) Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) Disk drive: unit 3 on SCSI controller 0 (unit 3) Tape drive: unit 5 on SCSI controller 0: unknown CDROM: unit 6 on SCSI controller 0 Integral SCSI controller 1: Version QL1040B (rev. 2), single ended IOC3/IOC4 serial port: tty1 IOC3/IOC4 serial port: tty2 IOC3/IOC4 serial port: tty3 IOC3/IOC4 serial port: tty4 IOC3 parallel port: plp1 Graphics board: InfiniteReality2 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Iris Audio Processor: version RAD revision 7.0, number 1 Origin BASEIO board, module 1 slot 1: Revision 3 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7 IOC3/IOC4 external interrupts: 1 HUB in Module 1/Slot 2: Revision 6 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 1: Revision 6 Speed 100.00 Mhz (enabled) IP27prom in Module 1/Slot n2: Revision 6.94 IP27prom in Module 1/Slot n1: Revision 6.94 IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.150