# hinv -vm
Location: /hw/module/001c01/node
            IP34 Board: barcode MNW845     part 030-1707-003 rev -H
Location: /hw/module/001c01/node/cpubus/0
        IP34PIMM Board: barcode MEP885     part 030-1730-001 rev -F
Location: /hw/module/001c01/Ibrick/xtalk/13
         ASTODYB Board: barcode MSE145     part 030-1725-001 rev -F
Location: /hw/module/001c01/Ibrick/xtalk/14
            IP34 Board: barcode MNW845     part 030-1707-003 rev -H
Location: /hw/module/001c01/Ibrick/xtalk/15
            IP34 Board: barcode MNW845     part 030-1707-003 rev -H
1 600 MHZ IP35 Processor
CPU: MIPS R14000 Processor Chip Revision: 2.3
FPU: MIPS R14010 Floating Point Chip Revision: 2.3
CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
Main memory size: 1536 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 1536 MB (enabled)
  Bank 0 contains 256 MB (Standard) DIMMS (enabled)
  Bank 1 contains 256 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 2: Version IEEE1394 SBP2
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 6 on SCSI controller 1
Integral SCSI controller 3: Version SAS/SATA LS1068
  Disk drive: unit 3 on SCSI controller 3 (unit 3)
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version MAD revision 1, number 1
  PCI Adapter ID (vendor 0x104c, device 0x8024) PCI slot 1
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x1000, device 0x0054) PCI slot 2
  PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 3
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
DMediaPro DM10 FW option: unit 0, revision 1.1.0
USB controller: type OHCI