# hinv -vm Location: /hw/module/1/slot/MotherBoard/node PIMM_225_2M_2P Board: barcode HTP839 part 013-2382-002 rev B Location: /hw/module/1/slot/io7/xbox_dualxtown XBOX_DUALXTOWN Board: barcode GKK426 part 030-1252-001 rev F Location: /hw/module/1/slot/io1/MotherBoard XBOX_EXT Board: barcode GRY731 part 030-1264-001 rev C IP29 Board: barcode HTR389 part 030-1389-001 rev A Location: /hw/module/1/slot/io1/MotherBoard/pci/2 [missing info: page A data not available] Laser 000000c59e74 Location: /hw/module/1/slot/io2/mscsi MSCSI Board: barcode FTN041 part 030-1281-001 rev D Location: /hw/module/1/slot/io3/menet MENET Board: barcode GGF931 part 030-0873-003 rev G Location: /hw/module/1/slot/io4/mscsi MSCSI Board: barcode GGE344 part 030-1243-001 rev F 2 225 MHZ IP27 Processors CPU: MIPS R10000 Processor Chip Revision: 3.4 FPU: MIPS R10010 Floating Point Chip Revision: 3.4 CPU 0 at Module 1/Slot 1/Slice A: 225 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz Tap 0x9 CPU 1 at Module 1/Slot 1/Slice B: 225 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 2 MB Speed 225 Mhz Tap 0x9 Main memory size: 1152 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 2 Mbytes Memory at Module 1/Slot 1: 1152 MB (enabled) Bank 0 contains 128 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Integral SCSI controller 2: Version QL1040B (rev. 2), single ended Integral SCSI controller 9: Version QL1040B (rev. 2), single ended Integral SCSI controller 11: Version QL1040B (rev. 2), differential Integral SCSI controller 10: Version QL1040B (rev. 2), single ended Integral SCSI controller 1: Version QL1040B (rev. 2), single ended CDROM: unit 6 on SCSI controller 1 Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) Disk drive: unit 2 on SCSI controller 0 (unit 2) Integral SCSI controller 12: Version QL1040B (rev. 2), single ended Integral SCSI controller 13: Version QL1040B (rev. 2), differential Integral SCSI controller 14: Version QL1040B (rev. 2), differential Integral SCSI controller 15: Version QL1040B (rev. 2), differential Integral SCSI controller 16: Version QL1040B (rev. 2), differential Integral SCSI controller 8: Version QL1040B (rev. 2), differential Integral SCSI controller 5: Version QL1040B (rev. 2), differential Integral SCSI controller 6: Version QL1040B (rev. 2), differential Integral SCSI controller 7: Version QL1040B (rev. 2), differential IOC3/IOC4 serial port: tty6 IOC3/IOC4 serial port: tty1 IOC3/IOC4 serial port: tty2 IOC3/IOC4 serial port: tty7 IOC3/IOC4 serial port: tty3 IOC3/IOC4 serial port: tty4 IOC3/IOC4 serial port: tty5 IOC3/IOC4 serial port: tty8 IOC3 parallel port: plp1 Gigabit Ethernet: eg0, module 1, PCI slot 6, firmware version 12.4.10 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Fast Ethernet: ef2, version 1, module 1, slot io3, pci 1 Fast Ethernet: ef1, version 1, module 1, slot io3, pci 0 Fast Ethernet: ef3, version 1, module 1, slot io3, pci 2 Fast Ethernet: ef4, version 1, module 1, slot io3, pci 3 Origin PCI XIO board, module 1 slot 7: Revision 4 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 Origin 200 base I/O, module 1 slot 1 Origin MENET board, module 1 slot 3: Revision 3 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 5 PCI Adapter ID (vendor 0x10a9, device 0x0009) PCI slot 6 PCI Adapter ID (vendor 0x1112, device 0x2200) PCI slot 7 Origin MSCSI board, module 1 slot 2: Revision 3 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3 Origin MSCSI board, module 1 slot 4: Revision 3 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 IOC3/IOC4 external interrupts: 1 HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled) IP27prom in Module 1/Slot n1: Revision 6.150 IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.150