# hinv -mv
Location: /hw/module/1/slot/MotherBoard/node
PIMM_270_4M_2P Board: barcode JHA773     part 013-2511-001 rev  C
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8
IP29 Board: barcode JHH021     part 030-1389-001 rev  B
Location: /hw/module/1/slot/MotherBoard/node/xtalk/8/pci/2
Location: /hw/module/2/slot/MotherBoard/node
PIMM_270_4M_2P Board: barcode JGW704     part 013-2511-001 rev  C
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8
IP29 Board: barcode JGW381     part 030-1389-001 rev  B
Location: /hw/module/2/slot/MotherBoard/node/xtalk/8/pci/2
4 270 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
CPU 0 at Module 1/Slot 1/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Secondary cache: Size 4 MB Speed 180 Mhz
CPU 1 at Module 1/Slot 1/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Secondary cache: Size 4 MB Speed 180 Mhz
CPU 2 at Module 2/Slot 2/Slice A: 270 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Secondary cache: Size 4 MB Speed 180 Mhz
CPU 3 at Module 2/Slot 2/Slice B: 270 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Secondary cache: Size 4 MB Speed 180 Mhz
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 1/Slot 1: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 2/Slot 2: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0
Disk drive: unit 2 on SCSI controller 0
Disk drive: unit 3 on SCSI controller 0
Integral SCSI controller 2: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 2
Integral SCSI controller 3: Version QL1040B (rev. 2), single ended
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3 serial port: tty1
IOC3 serial port: tty3
IOC3 serial port: tty2
IOC3 serial port: tty4
IOC3 parallel port: plp1
IOC3 parallel port: plp2
Integral Fast Ethernet: ef0, version 1, module 1, slot MotherBoard, pci 2
Fast Ethernet: ef1, version 1, module 2, slot MotherBoard, pci 2
Origin 200 base I/O, module 1 slot 1
Origin 200 base I/O, module 2 slot 2
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
IOC3 external interrupts: 1
IOC3 external interrupts: 2
HUB in Module 1/Slot 1: Revision 5 Speed 90.00 Mhz (enabled)
HUB in Module 2/Slot 2: Revision 5 Speed 90.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.27
IP27prom in Module 2/Slot n2: Revision 6.27