# hinv -vm Location: /hw/module/1/slot/n1/node MODULEID Board: barcode K0027972 part rev 8P12_MPLN Board: barcode KAC200 part 030-1535-001 rev B IP31 Board: barcode HXE840 part 030-1255-003 rev D IP31PIMM Board: barcode DGK362 part 030-1313-002 rev B Location: /hw/module/1/slot/n2/node IP31 Board: barcode HXE723 part 030-1255-003 rev D IP31PIMM Board: barcode HXE954 part 030-1313-002 rev A Location: /hw/module/1/slot/io1/baseio BASEIO Board: barcode KCF457 part 030-1124-002 rev M Location: /hw/module/1/slot/io4/mscsi MSCSI Board: barcode HMK175 part 030-1243-001 rev M Location: /hw/module/1/slot/io6/fibre_channel FIBRE_CHANNEL Board: barcode EAA623 part 030-0927-003 rev B Location: /hw/module/1/slot/io3/menet MENET Board: barcode GAH822 part 030-0873-003 rev E 4 250 MHZ IP27 Processors CPU: MIPS R10000 Processor Chip Revision: 3.4 FPU: MIPS R10010 Floating Point Chip Revision: 3.4 CPU 0 at Module 1/Slot 1/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 CPU 1 at Module 1/Slot 1/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x9 CPU 2 at Module 1/Slot 2/Slice A: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x19 CPU 3 at Module 1/Slot 2/Slice B: 250 Mhz MIPS R10000 Processor Chip (enabled) Processor revision: 3.4. Scache: Size 4 MB Speed 250 Mhz Tap 0x19 Main memory size: 2048 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 4 Mbytes Memory at Module 1/Slot 1: 1024 MB (enabled) Bank 0 contains 128 MB (Standard) DIMMS (enabled) Bank 1 contains 128 MB (Standard) DIMMS (enabled) Bank 2 contains 128 MB (Standard) DIMMS (enabled) Bank 3 contains 128 MB (Standard) DIMMS (enabled) Bank 4 contains 128 MB (Standard) DIMMS (enabled) Bank 5 contains 128 MB (Standard) DIMMS (enabled) Bank 6 contains 128 MB (Standard) DIMMS (enabled) Bank 7 contains 128 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 2: 1024 MB (enabled) Bank 0 contains 128 MB (Standard) DIMMS (enabled) Bank 1 contains 128 MB (Standard) DIMMS (enabled) Bank 2 contains 128 MB (Standard) DIMMS (enabled) Bank 3 contains 128 MB (Standard) DIMMS (enabled) Bank 4 contains 128 MB (Standard) DIMMS (enabled) Bank 5 contains 128 MB (Standard) DIMMS (enabled) Bank 6 contains 128 MB (Standard) DIMMS (enabled) Bank 7 contains 128 MB (Standard) DIMMS (enabled) Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) CDROM: unit 6 on SCSI controller 0 Integral SCSI controller 1: Version QL1040B (rev. 2), single ended Integral SCSI controller 7: Version Fibre Channel AIC-1160, revision 1 Integral SCSI controller 2: Version QL1040B (rev. 2), differential Integral SCSI controller 3: Version QL1040B (rev. 2), differential Integral SCSI controller 4: Version QL1040B (rev. 2), differential Integral SCSI controller 5: Version QL1040B (rev. 2), differential Integral SCSI controller 6: Version Fibre Channel AIC-1160, revision 1 IOC3/IOC4 serial port: tty1 IOC3/IOC4 serial port: tty2 IOC3/IOC4 serial port: tty3 IOC3/IOC4 serial port: tty4 IOC3/IOC4 serial port: tty5 IOC3/IOC4 serial port: tty6 IOC3/IOC4 serial port: tty7 IOC3/IOC4 serial port: tty8 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Fast Ethernet: ef1, version 1, module 1, slot io3, pci 0 Fast Ethernet: ef2, version 1, module 1, slot io3, pci 1 Fast Ethernet: ef3, version 1, module 1, slot io3, pci 2 Fast Ethernet: ef4, version 1, module 1, slot io3, pci 3 Origin BASEIO board, module 1 slot 1: Revision 4 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 Origin MSCSI board, module 1 slot 4: Revision 4 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 2 PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 3 Origin FIBRE CHANNEL board, module 1 slot 6: Revision 3 Origin MENET board, module 1 slot 3: Revision 3 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 0 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 1 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2 PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 3 PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0 PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1 IOC3/IOC4 external interrupts: 1 HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled) IP27prom in Module 1/Slot n1: Revision 6.156 IP27prom in Module 1/Slot n2: Revision 6.111 IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.156