# hinv -vm Location: /hw/module/1/slot/n1/node MODULEID Board: barcode K0014982 part rev IP31 Board: barcode JRM017 part 030-1255-004 rev A IP31PIMM8MB Board: barcode JRX213 part 030-1401-003 rev A 8P12_MPLN Board: barcode GFK590 part 013-1547-003 rev E Location: /hw/module/1/slot/n2/node IP31 Board: barcode JRM970 part 030-1255-004 rev A IP31PIMM8MB Board: barcode JRS944 part 030-1401-003 rev A Location: /hw/module/1/slot/n3/node IP31PIMM8MB Board: barcode JRS747 part 030-1401-003 rev A IP31 Board: barcode JRM631 part 030-1255-004 rev A Location: /hw/module/1/slot/n4/node IP31PIMM8MB Board: barcode JDS490 part 030-1401-003 rev A IP31 Board: barcode JEB966 part 030-1255-004 rev A Location: /hw/module/1/slot/r1/router ROUTER_IR1 Board: barcode KCJ162 part 030-0841-003 rev B Location: /hw/module/1/slot/r2/router ROUTER_IR1 Board: barcode KCJ137 part 030-0841-003 rev B Location: /hw/module/1/slot/io4/menet MENET Board: barcode HKM786 part 030-0873-003 rev J Location: /hw/module/1/slot/io1/baseio MIO Board: barcode JKV745 part 030-0880-003 rev G BASEIO Board: barcode HSE188 part 030-0734-002 rev N Location: /hw/module/1/slot/io5/fibre_channel FIBRE_CHANNEL Board: barcode JJD789 part 030-0927-003 rev E Location: /hw/module/1/slot/io3/mgras MOT10 Board: barcode GXA772 part 030-1241-002 rev F 8 300 MHZ IP27 Processors CPU: MIPS R12000 Processor Chip Revision: 2.5 FPU: MIPS R12010 Floating Point Chip Revision: 2.5 CPU 0 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 1 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 2 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 3 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 4 at Module 1/Slot 3/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 5 at Module 1/Slot 3/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 6 at Module 1/Slot 4/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 7 at Module 1/Slot 4/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa Main memory size: 13312 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 8 Mbytes Memory at Module 1/Slot 1: 4096 MB (enabled) Bank 0 contains 512 MB (Premium) DIMMS (enabled) Bank 1 contains 512 MB (Premium) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (enabled) Bank 4 contains 512 MB (Standard) DIMMS (enabled) Bank 5 contains 512 MB (Standard) DIMMS (disabled) Bank 6 contains 512 MB (Standard) DIMMS (enabled) Bank 7 contains 512 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 2: 2048 MB (enabled) Bank 0 contains 512 MB (Premium) DIMMS (enabled) Bank 1 contains 512 MB (Premium) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 3: 3584 MB (enabled) Bank 0 contains 512 MB (Premium) DIMMS (enabled) Bank 1 contains 512 MB (Premium) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (disabled) Bank 4 contains 512 MB (Standard) DIMMS (enabled) Bank 5 contains 512 MB (Standard) DIMMS (enabled) Bank 6 contains 512 MB (Standard) DIMMS (enabled) Bank 7 contains 512 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 4: 3584 MB (enabled) Bank 0 contains 512 MB (Premium) DIMMS (enabled) Bank 1 contains 512 MB (Premium) DIMMS (enabled) Bank 2 contains 512 MB (Standard) DIMMS (enabled) Bank 3 contains 512 MB (Standard) DIMMS (disabled) Bank 4 contains 512 MB (Standard) DIMMS (enabled) Bank 5 contains 512 MB (Standard) DIMMS (disabled) Bank 6 contains 512 MB (Standard) DIMMS (enabled) ROUTER in Module 1/Slot 2: Revision 2: Active Ports [4,5,6] (enabled) ROUTER in Module 1/Slot 4: Revision 2: Active Ports [4,5,6] (enabled) Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) CDROM: unit 6 on SCSI controller 0 Integral SCSI controller 1: Version QL1040B (rev. 2), single ended Integral SCSI controller 3: Version Fibre Channel AIC-1160, revision 2 Integral SCSI controller 2: Version Fibre Channel AIC-1160, revision 2 IOC3 serial port: tty3 IOC3 serial port: tty4 IOC3 serial port: tty5 IOC3 serial port: tty6 IOC3 serial port: tty7 IOC3 serial port: tty8 IOC3 serial port: tty1 IOC3 serial port: tty2 IOC3 serial port: tty9 IOC3 serial port: tty10 IOC3 parallel port: plp1 Graphics board: ESI with texture option Fast Ethernet: ef1, version 1, module 1, slot io4, pci 0 Fast Ethernet: ef2, version 1, module 1, slot io4, pci 1 Fast Ethernet: ef3, version 1, module 1, slot io4, pci 2 Fast Ethernet: ef4, version 1, module 1, slot io4, pci 3 Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Iris Audio Processor: version RAD revision 7.0, number 1 Origin MENET board, module 1 slot 4: Revision 4 PCI Adapter ID (vendor 4265, device 3) pci slot 0 PCI Adapter ID (vendor 4265, device 3) pci slot 1 PCI Adapter ID (vendor 4265, device 3) pci slot 2 PCI Adapter ID (vendor 4265, device 3) pci slot 3 Origin BASEIO board, module 1 slot 1: Revision 4 PCI Adapter ID (vendor 4265, device 3) pci slot 6 PCI Adapter ID (vendor 4265, device 3) pci slot 2 PCI Adapter ID (vendor 4215, device 4128) pci slot 0 PCI Adapter ID (vendor 4215, device 4128) pci slot 1 PCI Adapter ID (vendor 4265, device 5) pci slot 7 Origin FIBRE CHANNEL board, module 1 slot 5: Revision 4 PCI Adapter ID (vendor 36868, device 4448) pci slot 0 PCI Adapter ID (vendor 36868, device 4448) pci slot 1 IOC3 external interrupts: 1 HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 3: Revision 5 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 4: Revision 5 Speed 100.00 Mhz (enabled) IP27prom in Module 1/Slot n1: Revision 6.156 IP27prom in Module 1/Slot n2: Revision 6.156 IP27prom in Module 1/Slot n3: Revision 6.156 IP27prom in Module 1/Slot n4: Revision 6.156 IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.129 # gfxinfo Graphics board 0 is "IMPACTSR" graphics. Managed (":0.0") 1280x1024 Product ID 0x2, 1 GE, 1 RE, 4 TRAMs MGRAS revision 4, RA revision 0 HQ rev B, GE12 rev A, RE4 rev C, PP1 rev E, VC3 rev A, CMAP rev E unknown, assuming 19" monitor (id 0xf) (Could not contact X server; thus, no XSGIvc information available) # hinv -vm Location: /hw/module/1/slot/n1/node MODULEID Board: barcode K0014982 part rev IP31 Board: barcode JRM017 part 030-1255-004 rev A IP31PIMM8MB Board: barcode JRX213 part 030-1401-003 rev A 8P12_MPLN Board: barcode GFK590 part 013-1547-003 rev E Location: /hw/module/1/slot/n2/node IP31 Board: barcode JRM970 part 030-1255-004 rev A IP31PIMM8MB Board: barcode JRS944 part 030-1401-003 rev A Location: /hw/module/1/slot/n3/node IP31PIMM8MB Board: barcode JRS747 part 030-1401-003 rev A IP31 Board: barcode JRM631 part 030-1255-004 rev A Location: /hw/module/1/slot/n4/node IP31PIMM8MB Board: barcode JDS490 part 030-1401-003 rev A IP31 Board: barcode JEB966 part 030-1255-004 rev A Location: /hw/module/1/slot/r1/router ROUTER_IR1 Board: barcode KCJ162 part 030-0841-003 rev B Location: /hw/module/1/slot/r2/router ROUTER_IR1 Board: barcode KCJ137 part 030-0841-003 rev B Location: /hw/module/1/slot/io1/baseio MIO Board: barcode JKV745 part 030-0880-003 rev G BASEIO Board: barcode HSE188 part 030-0734-002 rev N Location: /hw/module/1/slot/io3/mgras MOT10 Board: barcode GXA772 part 030-1241-002 rev F 8 300 MHZ IP27 Processors CPU: MIPS R12000 Processor Chip Revision: 2.5 FPU: MIPS R12010 Floating Point Chip Revision: 2.5 CPU 0 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 1 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 2 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 3 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 4 at Module 1/Slot 3/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 5 at Module 1/Slot 3/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 6 at Module 1/Slot 4/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa CPU 7 at Module 1/Slot 4/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled) Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa Main memory size: 4096 Mbytes Instruction cache size: 32 Kbytes Data cache size: 32 Kbytes Secondary unified instruction/data cache size: 8 Mbytes Memory at Module 1/Slot 1: 1024 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 2: 1024 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 3: 1024 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) Memory at Module 1/Slot 4: 1024 MB (enabled) Bank 0 contains 512 MB (Standard) DIMMS (enabled) Bank 1 contains 512 MB (Standard) DIMMS (enabled) ROUTER in Module 1/Slot 2: Revision 2: Active Ports [4,5,6] (enabled) ROUTER in Module 1/Slot 4: Revision 2: Active Ports [4,5,6] (enabled) Integral SCSI controller 0: Version QL1040B (rev. 2), single ended Disk drive: unit 1 on SCSI controller 0 (unit 1) CDROM: unit 6 on SCSI controller 0 Integral SCSI controller 1: Version QL1040B (rev. 2), single ended IOC3 serial port: tty1 IOC3 serial port: tty2 IOC3 serial port: tty3 IOC3 serial port: tty4 IOC3 parallel port: plp1 Graphics board: ESI with texture option Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2 Iris Audio Processor: version RAD revision 7.0, number 1 Origin BASEIO board, module 1 slot 1: Revision 4 PCI Adapter ID (vendor 4265, device 3) pci slot 6 PCI Adapter ID (vendor 4265, device 3) pci slot 2 PCI Adapter ID (vendor 4215, device 4128) pci slot 0 PCI Adapter ID (vendor 4215, device 4128) pci slot 1 PCI Adapter ID (vendor 4265, device 5) pci slot 7 IOC3 external interrupts: 1 HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 3: Revision 5 Speed 100.00 Mhz (enabled) HUB in Module 1/Slot 4: Revision 5 Speed 100.00 Mhz (enabled) IP27prom in Module 1/Slot n1: Revision 6.156 IP27prom in Module 1/Slot n2: Revision 6.156 IP27prom in Module 1/Slot n3: Revision 6.156 IP27prom in Module 1/Slot n4: Revision 6.156 IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.129