# hinv -mv
Location: /hw/module/001c01/node
IP34 Board: barcode NCJ712     part 030-1707-004 rev -C
Location: /hw/module/001c01/node/cpubus/0
IP34PIMM Board: barcode NNN514     part 030-1932-001 rev -B
###Location: /hw/module/001c01/Ibrick/xtalk/13
###       ASTODYV10 Board: barcode NSR498     part 030-1826-003 rev -A
Location: /hw/module/001c01/Ibrick/xtalk/13
ASTODY Board: barcode MLD922     part 030-1726-003 rev -E
Location: /hw/module/001c01/Ibrick/xtalk/14
IP34 Board: barcode NCJ712     part 030-1707-004 rev -C
Location: /hw/module/001c01/Ibrick/xtalk/15
IP34 Board: barcode NCJ712     part 030-1707-004 rev -C
1 800 MHZ IP35 Processor
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 4 MB Speed 400 Mhz  Tap 0xa
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 2048 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version QL1280, low voltage differential
Integral SCSI controller 3: Version QL1280, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, single ended
CDROM: unit 4 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
###Graphics board: V10
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version MAD revision 1, number 1
PCI Adapter ID (vendor 0x1077, device 0x1280) PCI slot 1
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x1412, device 0x1724) PCI slot 2
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x1045, device 0xc861) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI

# gfxinfo -vv
Graphics board 0 is "ODYSSEY" graphics.
###        Managed (":0.0") 1920x1200
###        BUZZ version B.2
###        PB&J version 1
###        32MB memory
###                Banks: 2, CAS latency: 3
###         Monitor 0 type: SGX 4352
###        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
###        Channel 0:
###         Origin = (0,0)
###         Video Output: 1920 pixels, 1200 lines, 60.02Hz (1920x1200_60)
###         Video Format Flags:  (none)
###         Sync Disabled
###         Using Gamma Map 0
###         Monitor Type:  SGI-4352
###         Gain (all color components) - 0.000000 ; range [1,10]
Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1920x1200
BUZZ version B.1
PB&J version 1
128MB memory
Banks: 4, CAS latency: 3
Compositor port 1 attached to channel 0 nic 0x1004a768
CMP:  No NIC serial number available.
Monitor 0 type: DEL -4075
Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
Channel 0:
Origin = (0,0)
Video Output: 1920 pixels, 1200 lines, 60.00Hz (1920x1200_60p)
Video Format Flags:  (none)
Sync Disabled
Using Gamma Map 0
Monitor Type:  DEL-61461
Gain (all color components) - 0.000000 ; range [1,10][/i]