Octane

Model: Octane
Credit: mrthinlysliced Unregistered
Date: 2018-06-10
Source: forums.irixnet.org
Raw: text · json

ip	IP30
board	PM20300MHZ	rev J
board	IP30	rev B
board	FP1	rev G
board	PWR.SPPLY.ER	rev C
board	ODY128B1_2	rev A
asic	HEART	rev F
cpu	R12000 ×2	300 MHz, rev 2.3, FPU R12010
memory	Main memory	2048 MB
asic	XBOW	rev 1.4
scsi	QL1040B ×2
storage	Disk ×2
graphics	V12
network	Fast Ethernet (ef)
audio	RAD	rev 12.0
pci	PCI 0x10a9:0x0003
pci	PCI 0x1077:0x1020 ×2
pci	PCI 0x10a9:0x0005

`hinv -vm`

Location: /hw/node
      PM20300MHZ Board: barcode HKH112     part 030-1356-001 rev  J
Location: /hw/node/xtalk/15
            IP30 Board: barcode HXY417     part 030-1467-001 rev  B
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode KVH126     part 030-0891-003 rev  G
    PWR.SPPLY.ER Board: barcode AAE9160390 part 060-0035-001 rev  C
Location: /hw/node/xtalk/11
      ODY128B1_2 Board: barcode NEH896     part 030-1945-002 rev  A
2 300 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 2048 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3