irix-hinv
Location: /hw/module/1/slot/n2/node
IP31 Board: barcode HTY102 part 030-1255-003 rev B
IP31PIMM8MB Board: barcode KHK666 part 030-1401-002 rev C
Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0025789 part rev
IP31 Board: barcode JEG084 part 030-1255-004 rev A
IP31PIMM8MB Board: barcode JDS946 part 030-1401-002 rev B
4P1G5_MPLN Board: barcode JRZ952 part 030-1066-002 rev L
Location: /hw/module/1/slot/io4/kona
GE14-4 Board: barcode GAJ247 part 030-1129-002 rev G
Location: /hw/module/1/slot/io5/fibre_channel
FIBRE_CHANNEL Board: barcode GTT357 part 030-0927-003 rev C
Location: /hw/module/1/slot/io1/baseio
BASEIO Board: barcode JJZ109 part 030-0734-002 rev N
MIO Board: barcode JJE728 part 030-0880-003 rev G
Location: /hw/module/1/slot/io3/divo
DIVO Board: barcode JRR377 part 030-1305-001 rev E
4 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 2.3
CPU 0 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 1 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 2 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 3 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
Main memory size: 2880 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 82: 1792 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Bank 4 contains 256 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 81: 1088 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 64 MB (Standard) DIMMS (enabled)
Integral SCSI controller 4: Version Fibre Channel AIC-1160, revision 2
Disk drive: unit 1 on SCSI controller 4 (unit 1)
Disk drive: unit 2 on SCSI controller 4 (unit 2)
Disk drive: unit 3 on SCSI controller 4 (unit 3)
Disk drive: unit 4 on SCSI controller 4 (unit 4)
Disk drive: unit 5 on SCSI controller 4 (unit 5)
Disk drive: unit 6 on SCSI controller 4 (unit 6)
Disk drive: unit 7 on SCSI controller 4 (unit 7)
Disk drive: unit 8 on SCSI controller 4 (unit 8)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Disk drive: unit 3 on SCSI controller 0 (unit 3)
Disk drive: unit 4 on SCSI controller 0 (unit 4)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 5: Version Fibre Channel AIC-1160, revision 2
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
IOC3 parallel port: plp1
Graphics board: InfiniteReality2
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin FIBRE CHANNEL board, module 1 slot 5: Revision 3
Origin BASEIO board, module 1 slot 1: Revision 4
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 0
PCI Adapter ID (vendor 0x9004, device 0x1160) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 6
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 7
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 0
PCI Adapter ID (vendor 0x10a9, device 0x0002) PCI slot 2
DIVO Video: controller 1 unit 0: Input, Output
IOC3/IOC4 external interrupts: 1
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n1: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io2: Revision 6.156
irix-gfxinfo
Graphics board 0 is "KONAL" graphics.
Managed (":0.0") 1600x1200
Display has 8 channels
4 GEs (of 4), occmask = 0x0f
4MB external BEF ram, 32bit path
2 RM7 boards (of 2) 1/1/0/0
Texture Memory: 64MB/64MB/-/-
Medium pixel depth
32K cmap, 64K external gamma
Channel 0:
Origin = (0,0)
Video Output: 1600 pixels, 1200 lines, 60.00Hz (1600x1200_60.vfo)
Channel 1:
Channel's Source Size: 720 pixels, 576 lines; Origin = (400,300)
Video Output: 800 pixels, 600 lines, 60.00Hz (800x600_60.vfo)