Origin 300

Model: Origin 300
Credit: regan_russell
Date: 2008-03-12 to 2008-03-13
Source: nekonomicon.irixnet.org
Raw: text · json

ip	IP35
board	IP35 node board
asic	BEDROCK	rev 2
cpu	R14000 ×4	500 MHz, rev 2.4, 2 MB cache, FPU R14010
board	IBRICK
asic	BRIDGE ×2	rev 2
pci	PCI (SCSI interface) ×2	rev 6
pci	IOC3	rev 1
asic	XBOW	rev 2
board	IP45_4CPU	rev C
board	IO8	rev F
memory	Main memory	4096 MB
scsi	QL12160 ×4
storage	Disk ×2
network	Fast Ethernet (ef)
pci	PCI 0x1077:0x1216 ×2
pci	PCI 0x10a9:0x0003
pci	PCI 0x11c1:0x5802
asic	HUB	rev 2

`hinv -v -m -mvvv`

IP35 Node Board, Module 001c01
ASIC BEDROCK Rev 2, 200 MHz, (nasid 0)
Processor A: 500 MHz R14000 Rev 2.4
Secondary Cache 2MB 250MHz Tap 0xa , (cpu 0)
R14010FPC Rev 2.4
Processor B: 500 MHz R14000 Rev 2.4
Secondary Cache 2MB 250MHz Tap 0xa , (cpu 1)
R14010FPC Rev 2.4
Processor C: 500 MHz R14000 Rev 2.4
Secondary Cache 2MB 250MHz Tap 0xa , (cpu 2)
R14010FPC Rev 2.4
Processor D: 500 MHz R14000 Rev 2.4
Secondary Cache 2MB 250MHz Tap 0xa , (cpu 3)
R14010FPC Rev 2.4
Memory on board, 4096 MBytes (Standard)
Bank 0, 1024 MBytes (Premium)  <-- (Software Bank 0)
Bank 1, 1024 MBytes (Premium)
Bank 2, 1024 MBytes (Premium)
Bank 3, 1024 MBytes (Premium)
IBRICK Bridge, Module 001c01
ASIC BRIDGE Rev 2, (widget 14)
adapter PCI (SCSI interface) Rev 6, (pci id 2)
IBRICK Bridge, Module 001c01
ASIC BRIDGE Rev 2, (widget 15)
adapter PCI (SCSI interface) Rev 6, (pci id 1)
adapter IOC3 Rev 1, (pci id 4)
controller multi function SuperIO
controller Ethernet Rev 1
adapter USB (OHCI interface) , (pci id 5)
ASIC XBOW Rev 2, on CBrick, Module 001c01

`hinv -vm`

Location: /hw/module/001c01/node
IP45_4CPU Board: barcode MLJ194     part 030-1779-001 rev -C
Location: /hw/module/001c01/Ibrick/xtalk/14
IO8 Board: barcode MLG164     part 030-1673-003 rev -F
Location: /hw/module/001c01/Ibrick/xtalk/15
IO8 Board: barcode MLG164     part 030-1673-003 rev -F
4 500 MHZ IP35 Processors
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 2.4
CPU 0 at Module 001c01/Slot 0/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
CPU 1 at Module 001c01/Slot 0/Slice B: 500 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
CPU 2 at Module 001c01/Slot 0/Slice C: 500 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
CPU 3 at Module 001c01/Slot 0/Slice D: 500 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.4. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Memory at Module 001c01/Slot 0: 4096 MB (enabled)
Bank 0 contains 1024 MB (Premium) DIMMS (enabled)
Bank 1 contains 1024 MB (Premium) DIMMS (enabled)
Bank 2 contains 1024 MB (Premium) DIMMS (enabled)
Bank 3 contains 1024 MB (Premium) DIMMS (enabled)
Integral SCSI controller 4: Version QL12160, low voltage differential
Integral SCSI controller 6: Version QL12160, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3 serial port: tty3
IOC3 serial port: tty4
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
PCI Adapter ID (vendor 4215, device 4630) pci slot 2
PCI Adapter ID (vendor 4215, device 4630) pci slot 1
PCI Adapter ID (vendor 4265, device 3) pci slot 4
PCI Adapter ID (vendor 4545, device 22530) pci slot 5
IOC3 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.117
USB controller: type OHCI