Fuel

Model: Fuel
Credit: Torfinn Ingolfsen
Date: 2021-07-13
Source: tingo.homedns.org
Raw: text · json

ip	IP35
cpu	R14000	500 MHz, rev 2.3, 2 MB cache, FPU R14010
memory	Main memory	1536 MB
scsi	QL12160 ×2
storage	Disk
storage	CD-ROM
graphics	V10
network	Fast Ethernet (ef)
pci	PCI 0x1077:0x1216
pci	PCI 0x10a9:0x0003
pci	PCI 0x11c1:0x5802
asic	HUB	rev 2
board	IP34	rev G
board	ASTODYB	rev G
graphics	ODYSSEY

`hinv -v`

1 500 MHZ IP35 Processor
CPU: MIPS R14000 Processor Chip Revision: 2.3
FPU: MIPS R14010 Floating Point Chip Revision: 2.3
CPU 0 at Module 001c01/Slot 0/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
Main memory size: 1536 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Memory at Module 001c01/Slot 0: 1536 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
  Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL12160, single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 6 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.170
USB controller: type OHCI

`hinv -vm`

Location: /hw/module/001c01/node
            IP34 Board: barcode MET945     part 030-1707-003 rev -G
Location: /hw/module/001c01/Ibrick/xtalk/13
         ASTODYB Board: barcode MMD622     part 030-1725-001 rev -G
Location: /hw/module/001c01/Ibrick/xtalk/14
            IP34 Board: barcode MET945     part 030-1707-003 rev -G
Location: /hw/module/001c01/Ibrick/xtalk/15
            IP34 Board: barcode MET945     part 030-1707-003 rev -G
1 500 MHZ IP35 Processor
CPU: MIPS R14000 Processor Chip Revision: 2.3
FPU: MIPS R14010 Floating Point Chip Revision: 2.3
CPU 0 at Module 001c01/Slot 0/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)
  Processor revision: 2.3. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
Main memory size: 1536 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Memory at Module 001c01/Slot 0: 1536 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 256 MB (Standard) DIMMS (enabled)
  Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL12160, single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
  CDROM: unit 6 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.170
USB controller: type OHCI

`gfxinfo`

Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x1024
        BUZZ version B.1
        PB&J version 1
        32MB memory
                Banks: 2, CAS latency: 3
         Monitor 0 type: CPQ 5013
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)

`gfxinfo -vv`

Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x1024
        BUZZ version B.1
        PB&J version 1
        32MB memory
                Banks: 2, CAS latency: 3
         Monitor 0 type: CPQ 5013
        Input Sync: Voltage - Video Level; Source - Internal; Genlocked - False
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)
         Video Format Flags:  (none)
         Sync Disabled
         Using Gamma Map 0
         Monitor Type:  CPQ-5013
         Gain (all color components) - 0.000000 ; range [1,10]

`gfxinfo`

Graphics board 0 is "ODYSSEY" graphics.
        Unmanaged 1280x1024
        BUZZ version B.2
        PB&J version 1
        32MB memory
                Banks: 2, CAS latency: 3
         Monitor 0 type: CPQ 5013
        Xvc info not available for unmanaged boards
root@IRIS# /usr/gfx/gfxtopology
pipe 0  g @ 001c01/I:13 ASTODYV10 030-1826-002 -A MWY336

input   k @ 001c01/I:4  m @ 001c01/I:4