Fuel

Model: Fuel
Credit: kubatyszko
Date: 2012-10-31
Source: nekonomicon.irixnet.org
Raw: text · json

ip	IP35
board	IP34	rev L
board	IP34PIMM	rev G
board	ASTODYV10	rev A
cpu	R14000	600 MHz, rev 2.3, 4 MB cache, FPU R14010
memory	Main memory	1024 MB
scsi	QL12160 ×2
storage	Disk
storage	CD-ROM
graphics	V10
network	Fast Ethernet (ef)
pci	PCI 0x1077:0x1216
pci	PCI 0x10a9:0x0003
pci	PCI 0x1045:0xc861
asic	HUB	rev 2
graphics	ODYSSEY

`hinv -vm`

Location: /hw/module/001c01/node
IP34 Board: barcode MYD069     part 030-1707-003 rev -L
Location: /hw/module/001c01/node/cpubus/0
IP34PIMM Board: barcode MKZ626     part 030-1730-001 rev -G
Location: /hw/module/001c01/Ibrick/xtalk/13
ASTODYV10 Board: barcode MXH355     part 030-1826-002 rev -A
Location: /hw/module/001c01/Ibrick/xtalk/14
IP34 Board: barcode MYD069     part 030-1707-003 rev -L
Location: /hw/module/001c01/Ibrick/xtalk/15
IP34 Board: barcode MYD069     part 030-1707-003 rev -L
1 600 MHZ IP35 Processor
CPU: MIPS R14000 Processor Chip Revision: 2.3
FPU: MIPS R14010 Floating Point Chip Revision: 2.3
CPU 0 at Module 001c01/Slot 0/Slice A: 600 Mhz MIPS R14000 Processor Chip (enabled)
Processor revision: 2.3. Scache: Size 4 MB Speed 300 Mhz  Tap 0xa
Main memory size: 1024 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 1024 MB (enabled)
Bank 0 contains 256 MB (Standard) DIMMS (enabled)
Bank 1 contains 256 MB (Standard) DIMMS (enabled)
Bank 2 contains 256 MB (Standard) DIMMS (enabled)
Bank 3 contains 256 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
CDROM: unit 1 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x1045, device 0xc861) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI

`gfxinfo -vv`

Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1280x1024
BUZZ version B.2
PB&J version 1
32MB memory
Banks: 2, CAS latency: 3
Monitor 0 type: Unknown
(Could not contact X server; thus, no XSGIvc information available)