Fuel

Model

Fuel

Credit

kubatyszko

Date

2012-09-19

Source

nekonomicon.irixnet.org

Raw

text · json

Location: /hw/module/001c01/node
IP34 Board: barcode NSR361     part 030-1707-005 rev -B
Location: /hw/module/001c01/node/cpubus/0
IP34PIMM Board: barcode NPJ852     part 030-1932-001 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/13
ASTODYV10 Board: barcode NSP265     part 030-1826-003 rev -A
Location: /hw/module/001c01/Ibrick/xtalk/14
IP34 Board: barcode NSR361     part 030-1707-005 rev -B
Location: /hw/module/001c01/Ibrick/xtalk/15
IP34 Board: barcode NSR361     part 030-1707-005 rev -B
1 800 MHZ IP35 Processor
CPU: MIPS R16000 Processor Chip Revision: 2.2
FPU: MIPS R16010 Floating Point Chip Revision: 2.2
CPU 0 at Module 001c01/Slot 0/Slice A: 800 Mhz MIPS R16000 Processor Chip (enabled)
Processor revision: 2.2. Scache: Size 4 MB Speed 400 Mhz  Tap 0xa
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 4 Mbytes
Memory at Module 001c01/Slot 0: 2048 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Bank 2 contains 512 MB (Premium) DIMMS (enabled)
Bank 3 contains 512 MB (Premium) DIMMS (enabled)
Integral SCSI controller 2: Version LS1030, low voltage differential
Integral SCSI controller 3: Version LS1030, low voltage differential
Integral SCSI controller 0: Version QL12160, low voltage differential
Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, single ended
CDROM: unit 1 on SCSI controller 1
Integral SCSI controller 4: Version SAS/SATA LS1064
Disk drive: unit 3 on SCSI controller 4 (unit 3)
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V10
Gigabit Ethernet: tg1, module 001c01, PCI bus 2 slot 1
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
Iris Audio Processor: version EMU revision A3, number 1
PCI Adapter ID (vendor 0x14e4, device 0x1645) PCI slot 1
PCI Adapter ID (vendor 0x1000, device 0x0030) PCI slot 2
PCI Adapter ID (vendor 0x1000, device 0x0030) PCI slot 2
PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
PCI Adapter ID (vendor 0x1102, device 0x0004) PCI slot 2
PCI Adapter ID (vendor 0x1102, device 0x7003) PCI slot 2
PCI Adapter ID (vendor 0x1102, device 0x4001) PCI slot 2
PCI Adapter ID (vendor 0x1000, device 0x0050) PCI slot 3
PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
PCI Adapter ID (vendor 0x1045, device 0xc861) PCI slot 5
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI

Graphics board 0 is "ODYSSEY" graphics.
Managed (":0.0") 1920x1088
BUZZ version B.2
PB&J version 1
32MB memory
Banks: 2, CAS latency: 3
Monitor 0 type: BNQ 30988
(Could not contact X server; thus, no XSGIvc information available)