hinv -vm
Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0014982 part rev
IP31 Board: barcode JRM017 part 030-1255-004 rev A
IP31PIMM8MB Board: barcode JRX213 part 030-1401-003 rev A
8P12_MPLN Board: barcode GFK590 part 013-1547-003 rev E
Location: /hw/module/1/slot/n2/node
IP31 Board: barcode JRM970 part 030-1255-004 rev A
IP31PIMM8MB Board: barcode JRS944 part 030-1401-003 rev A
Location: /hw/module/1/slot/n3/node
IP31PIMM8MB Board: barcode JRS747 part 030-1401-003 rev A
IP31 Board: barcode JRM631 part 030-1255-004 rev A
Location: /hw/module/1/slot/n4/node
IP31PIMM8MB Board: barcode JDS490 part 030-1401-003 rev A
IP31 Board: barcode JEB966 part 030-1255-004 rev A
Location: /hw/module/1/slot/r1/router
ROUTER_IR1 Board: barcode KCJ162 part 030-0841-003 rev B
Location: /hw/module/1/slot/r2/router
ROUTER_IR1 Board: barcode KCJ137 part 030-0841-003 rev B
Location: /hw/module/1/slot/io4/menet
MENET Board: barcode HKM786 part 030-0873-003 rev J
Location: /hw/module/1/slot/io1/baseio
MIO Board: barcode JKV745 part 030-0880-003 rev G
BASEIO Board: barcode HSE188 part 030-0734-002 rev N
Location: /hw/module/1/slot/io5/fibre_channel
FIBRE_CHANNEL Board: barcode JJD789 part 030-0927-003 rev E
Location: /hw/module/1/slot/io3/mgras
MOT10 Board: barcode GXA772 part 030-1241-002 rev F
8 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.5
FPU: MIPS R12010 Floating Point Chip Revision: 2.5
CPU 0 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 1 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 2 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 3 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 4 at Module 1/Slot 3/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 5 at Module 1/Slot 3/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 6 at Module 1/Slot 4/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 7 at Module 1/Slot 4/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
Main memory size: 13312 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 1: 4096 MB (enabled)
Bank 0 contains 512 MB (Premium) DIMMS (enabled)
Bank 1 contains 512 MB (Premium) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Bank 4 contains 512 MB (Standard) DIMMS (enabled)
Bank 5 contains 512 MB (Standard) DIMMS (disabled)
Bank 6 contains 512 MB (Standard) DIMMS (enabled)
Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 2: 2048 MB (enabled)
Bank 0 contains 512 MB (Premium) DIMMS (enabled)
Bank 1 contains 512 MB (Premium) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 3: 3584 MB (enabled)
Bank 0 contains 512 MB (Premium) DIMMS (enabled)
Bank 1 contains 512 MB (Premium) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (disabled)
Bank 4 contains 512 MB (Standard) DIMMS (enabled)
Bank 5 contains 512 MB (Standard) DIMMS (enabled)
Bank 6 contains 512 MB (Standard) DIMMS (enabled)
Bank 7 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 4: 3584 MB (enabled)
Bank 0 contains 512 MB (Premium) DIMMS (enabled)
Bank 1 contains 512 MB (Premium) DIMMS (enabled)
Bank 2 contains 512 MB (Standard) DIMMS (enabled)
Bank 3 contains 512 MB (Standard) DIMMS (disabled)
Bank 4 contains 512 MB (Standard) DIMMS (enabled)
Bank 5 contains 512 MB (Standard) DIMMS (disabled)
Bank 6 contains 512 MB (Standard) DIMMS (enabled)
ROUTER in Module 1/Slot 2: Revision 2: Active Ports [4,5,6] (enabled)
ROUTER in Module 1/Slot 4: Revision 2: Active Ports [4,5,6] (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
Integral SCSI controller 3: Version Fibre Channel AIC-1160, revision 2
Integral SCSI controller 2: Version Fibre Channel AIC-1160, revision 2
IOC3 serial port: tty3
IOC3 serial port: tty4
IOC3 serial port: tty5
IOC3 serial port: tty6
IOC3 serial port: tty7
IOC3 serial port: tty8
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 serial port: tty9
IOC3 serial port: tty10
IOC3 parallel port: plp1
Graphics board: ESI with texture option
Fast Ethernet: ef1, version 1, module 1, slot io4, pci 0
Fast Ethernet: ef2, version 1, module 1, slot io4, pci 1
Fast Ethernet: ef3, version 1, module 1, slot io4, pci 2
Fast Ethernet: ef4, version 1, module 1, slot io4, pci 3
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin MENET board, module 1 slot 4: Revision 4
PCI Adapter ID (vendor 4265, device 3) pci slot 0
PCI Adapter ID (vendor 4265, device 3) pci slot 1
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4265, device 3) pci slot 3
Origin BASEIO board, module 1 slot 1: Revision 4
PCI Adapter ID (vendor 4265, device 3) pci slot 6
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 5) pci slot 7
Origin FIBRE CHANNEL board, module 1 slot 5: Revision 4
PCI Adapter ID (vendor 36868, device 4448) pci slot 0
PCI Adapter ID (vendor 36868, device 4448) pci slot 1
IOC3 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 3: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 4: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n3: Revision 6.156
IP27prom in Module 1/Slot n4: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.129
gfxinfo
Graphics board 0 is "IMPACTSR" graphics.
Managed (":0.0") 1280x1024
Product ID 0x2, 1 GE, 1 RE, 4 TRAMs
MGRAS revision 4, RA revision 0
HQ rev B, GE12 rev A, RE4 rev C, PP1 rev E,
VC3 rev A, CMAP rev E
unknown, assuming 19" monitor (id 0xf)
(Could not contact X server; thus, no XSGIvc information available)
hinv -vm
Location: /hw/module/1/slot/n1/node
MODULEID Board: barcode K0014982 part rev
IP31 Board: barcode JRM017 part 030-1255-004 rev A
IP31PIMM8MB Board: barcode JRX213 part 030-1401-003 rev A
8P12_MPLN Board: barcode GFK590 part 013-1547-003 rev E
Location: /hw/module/1/slot/n2/node
IP31 Board: barcode JRM970 part 030-1255-004 rev A
IP31PIMM8MB Board: barcode JRS944 part 030-1401-003 rev A
Location: /hw/module/1/slot/n3/node
IP31PIMM8MB Board: barcode JRS747 part 030-1401-003 rev A
IP31 Board: barcode JRM631 part 030-1255-004 rev A
Location: /hw/module/1/slot/n4/node
IP31PIMM8MB Board: barcode JDS490 part 030-1401-003 rev A
IP31 Board: barcode JEB966 part 030-1255-004 rev A
Location: /hw/module/1/slot/r1/router
ROUTER_IR1 Board: barcode KCJ162 part 030-0841-003 rev B
Location: /hw/module/1/slot/r2/router
ROUTER_IR1 Board: barcode KCJ137 part 030-0841-003 rev B
Location: /hw/module/1/slot/io1/baseio
MIO Board: barcode JKV745 part 030-0880-003 rev G
BASEIO Board: barcode HSE188 part 030-0734-002 rev N
Location: /hw/module/1/slot/io3/mgras
MOT10 Board: barcode GXA772 part 030-1241-002 rev F
8 300 MHZ IP27 Processors
CPU: MIPS R12000 Processor Chip Revision: 2.5
FPU: MIPS R12010 Floating Point Chip Revision: 2.5
CPU 0 at Module 1/Slot 1/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 1 at Module 1/Slot 1/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 2 at Module 1/Slot 2/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 3 at Module 1/Slot 2/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 4 at Module 1/Slot 3/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 5 at Module 1/Slot 3/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 6 at Module 1/Slot 4/Slice A: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
CPU 7 at Module 1/Slot 4/Slice B: 300 Mhz MIPS R12000 Processor Chip (enabled)
Processor revision: 2.5. Scache: Size 8 MB Speed 200 Mhz Tap 0xa
Main memory size: 4096 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 8 Mbytes
Memory at Module 1/Slot 1: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 2: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 3: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
Memory at Module 1/Slot 4: 1024 MB (enabled)
Bank 0 contains 512 MB (Standard) DIMMS (enabled)
Bank 1 contains 512 MB (Standard) DIMMS (enabled)
ROUTER in Module 1/Slot 2: Revision 2: Active Ports [4,5,6] (enabled)
ROUTER in Module 1/Slot 4: Revision 2: Active Ports [4,5,6] (enabled)
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
Disk drive: unit 1 on SCSI controller 0 (unit 1)
CDROM: unit 6 on SCSI controller 0
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3 serial port: tty1
IOC3 serial port: tty2
IOC3 serial port: tty3
IOC3 serial port: tty4
IOC3 parallel port: plp1
Graphics board: ESI with texture option
Integral Fast Ethernet: ef0, version 1, module 1, slot io1, pci 2
Iris Audio Processor: version RAD revision 7.0, number 1
Origin BASEIO board, module 1 slot 1: Revision 4
PCI Adapter ID (vendor 4265, device 3) pci slot 6
PCI Adapter ID (vendor 4265, device 3) pci slot 2
PCI Adapter ID (vendor 4215, device 4128) pci slot 0
PCI Adapter ID (vendor 4215, device 4128) pci slot 1
PCI Adapter ID (vendor 4265, device 5) pci slot 7
IOC3 external interrupts: 1
HUB in Module 1/Slot 1: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 2: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 3: Revision 5 Speed 100.00 Mhz (enabled)
HUB in Module 1/Slot 4: Revision 5 Speed 100.00 Mhz (enabled)
IP27prom in Module 1/Slot n1: Revision 6.156
IP27prom in Module 1/Slot n2: Revision 6.156
IP27prom in Module 1/Slot n3: Revision 6.156
IP27prom in Module 1/Slot n4: Revision 6.156
IO6prom on Global Master Baseio in Module 1/Slot io1: Revision 6.129